SLIDING GLASS - Sliding doors with bottom guide rails

Large openings, great visual impact

SLIDING GLASS - Sliding doors with bottom guide rails

The Moreschi sliding glass door can slide both inside and outside and eliminates any problem of cluttering up door collections.
The glass enhances the external or internal appearance of any space, and makes the door a design element of fine workmanship.


The Sliding glass door with bottom guide rail is made up of doors made with perimeter profiles in tubular steel with a dim.60x90mm section and connecting crosspieces made with tubular steel profiles with a dim.60x90mm section. all with zinc bath finish and subsequent painting in a RAL colour of your choice with peel effect. Tous les éléments métalliques sont galvanisés à chaud avec application d’une couche de fond de 60μm min. puis teinte au choix dans la gamme RAL et finition gaufré.

Half glass curtain walling of any type and finish (double glazing, safety glass, transparent, satin-finish, etc.) with a maximum total thickness of 40mm. Snap-in glass stop made with aluminium profile painted in the same colour as the door.

The upper rail is fixed to the ceiling or to the veil by special brackets designed and manufactured by us in galvanized steel. The upper slide is guaranteed by nylon olives which guarantee silence and great manoeuvrability. Everything is covered by a pre-painted and silicone-Curtained sheet metal casing in the upper part. ( Optional )

With the sliding door with bottom guide rail, galvanised steel wheels with double bearings are inserted in the lower tube. The upper and lower closure is made with nylon brushes with stainless steel support. The lower guide is in the shape of an omega reverse in press-folded galvanised steel and supplied with spacers to facilitate installation (at the customer's expense) and respect of the door centre distance. In the upper "C" guide in stainless steel, nylon wheels slide fixed to the upper part of the door.

With the suspended sliding door, the upper sliding is guaranteed by trolleys with 4 galvanised steel bearings that slide in a single stainless steel rail. The whole is covered by a stainless steel and siliconised sheet metal casing in the upper part. In the lower part, a stainless steel plate with double nylon wheels that guide the door in the sliding in a rigid way is fixed to the ground beyond the wall compartment.

The closure on the internal side, is guaranteed by 4-point fixing and central clutch. The handle prevents the hands from being squashed and guarantees the sliding of the galvanised and black painted steel rod at a closing point downwards. The same is fixed in the rod loops which guarantee precision and remarkable sliding. The lower end of the rod consists of a die-cast tip. In the case where the door is already supplied motorised as standard, the upper part is supplied with a safety micro to prevent unintentional opening with consequent problems with the motorisation.

The vertical seals, front and rear, are made of EPDM (anti-aging) natural rubber to ensure maximum closure. The space between the door and the rebate or between the doors is 50 mm (anti-crush) on all versions: manual, motorised or motorised as per current regulations. Prepared for standard motorisation.

Ready for standard motorisation for the floor solution Prepared for motorisation on request with special upper guide.


Fields of application with temperatures between +4° C and +40° C

CE marking EN 13241-1 (CPD), wind resistance class 3

Acoustic insolation UNI EN 717-1; R=28dB 12428 depending on the infill. Contact our technical office

Thermal transmittance according to standard 13241-1 annex B UNI EN 12428 depending on the infill. Contact our technical office



  • Motors according to current standards
  • Pedestrian door with or without threshold (wicket door)
  • Perimeter padding
  • External tower bolt with lock and lever
  • Support beams
  • Fixed side and top panels
  • Doors covering with: sandwich panels, mesh, wood.
  • Painting in RAL colour of your choice
  • Any availability for other colours/effects must be evaluated during the colour confirmation by the customer.



Moreschi guarantees a robust product of absolute design.

Customizable dimensions.

Painting of profiles in the RAL colours of your choice.

Suitable for outdoor and indoor use.

More information about these products?

See all the solutions proposed by Moreschi.