04-Chiusure Industriali Coibentate

Door consisting of a 40 mm thick panel with aluminium containment profiles and perimeter aluminium rebate frame, with seat for seals, anchored to the wall compartment by means of expansion plugs. The panel is completely covered with smooth or peeled sheets obtained through a continuous rolling process, in galvanized steel SENDZIMIR system, thickness 8/10, followed by phosphating and the application of 5 Micron thick primer on both faces. On the external side is applied the finishing varnish with a thickness of 20 Micron. This pre-painting offers, without any alteration, the resistance of 400 hours in a salt spray chamber. Finally, we prevent scratches by applying adhesive film to be removed after installation.

The insulation is guaranteed by the injection of self-extinguishing polyurethane foam according to DIN 4102 class B2, with a density of not less than 43/45 kg/m³, obtained through an under-press expansion process that ensures a high degree of thermal insulation. Hinges and handle are made of aluminium alloy In the case of installations in compartments not suitable to receive doweled doors, provide for the use of a counterframe with walling clamps, in tubular black steel dim.40x15x1.5.

Fields of application with temperatures between +4° C and +40° C

CE Marking EN 13241-1 (CPD)

Acoustic isolation UNI EN 717-1; R=28dB

Thermal transmittance according to standard 13241-1 U=1.7W / m²K

Optionals:

• Panic bars
• Panic bars with electric striker
• Electric locks
• Security locks
• Door Closing Pumps
• Unified cylinders
• Visual lights with safety glass
• Serramenti con vetro camera
• Perimeter padding
• Ventilation grids
• Stainless steel construction
• Panel pre-painted colours : B.co/similar grey RAL 9002, Aluminium white RAL 9006, Aluminium grey RAL 9007, Fire red RAL 3000, Moss green RAL 6005, Gentian blue RAL 5010, Pure white RAL 9010, Traffic white RAL 9016, Brown earth RAL 8028, Anthracite grey RAL 7016.
• Painting in RAL colour of your choice

The door consists of 52 mm thick doors. 20/10 thick galvanised steel perimeter frame, painted black, with anti-spatter gasket seat, anchored to the wall compartment by means of expansion plugs: the doors are completely covered with smooth or peeled sheets obtained by continuous rolling process, in galvanised steel SENDZIMIR system, followed by phosphating and the application of 5 Micron thick primer on both faces. On the external side is applied the finishing varnish with a thickness of 20 Micron. The surface thus obtained is completely smooth. This pre-painting offers, without any alteration, the resistance of 400 hours in a salt spray chamber. Finally, we prevent scratches by applying adhesive film to be removed after installation.

The insulation is guaranteed by the injection of self-extinguishing polyurethane foam according to DIN 4102 class B2, with a density of not less than 43/45 kg/m³, obtained through an under-press expansion process that ensures a high degree of thermal insulation. The hinges are made of black painted aluminium alloy, with anti-slip pin and anti-unscrewing frontal stripes. They allow the door leaf to be adjusted even after installation.

Le cerniere sono in lega di alluminio verniciate nere, con perno anti-sfilamento e mostrine frontali anti-svitamento.
Le stesse permettono di regolare il battente anche a montaggio avvenuto.

In the upper part there is a special galvanized and black painted steel profile to be inserted between the frame and the wall; it will be siliconized and will guarantee watertight between the wall and the frame. In the lower part, the closure is guaranteed by a double needle seal with pre-cut parts to guarantee the possibility of adjustment on non-planar floors.

Fields of application with temperatures between +4° C and +40° C

CE Marking EN 13241-1 (CPD)

Acoustic isolation UNI EN 717-1; R=28dB

Thermal transmittance according to standard 13241-1 U=1.7W / m²K

Optionals:

• Panic bars
• Panic bars with electric striker
• Electric locks
• Security locks
• Door Closing Pumps
• Unified cylinders
• Visual lights with safety glass
• Serramenti con vetro camera
• Perimeter padding
• Ventilation grids
• Stainless steel construction
• Corten Steel construction
• Prepainted colours : B.co/similar grey RAL 9002, Aluminium white RAL 9006, Aluminium grey RAL9007, Fire red RAL 3000, Moss green RAL 6005, Gentian blue RAL 5010, Pure white RAL 9010, Traffic white RAL 9016, Earth brown RAL 8028, Anthracite grey RAL 7016.
• Painting in RAL colour of your choice

Made with the same production process as the doors, the hinged pedestrian door has all the quality features of Moreschi's products.

The floor sliding door consists of 52 mm thick leaves with respective internal perimeter frames in 20/10 thick galvanised steel profile. The doors are entirely covered with smooth or peeled sheets obtained through a continuous rolling process, in galvanized steel SENDZIMIR system, followed by phosphating and the application of 20 Micron thick primer. This pre-painting offers, without any alteration, the resistance of 400 hours in a salt spray chamber. Finally, we prevent scratches by applying adhesive film to be removed after installation.

The insulation is guaranteed by the injection of self-extinguishing polyurethane foam according to DIN 4102 class B2, with a density of not less than 43/45 Kg/m³, obtained through an under-press expansion process that ensures a high degree of thermal insulation.

The upper rail is fixed in veletta or to the ceiling by special brackets designed and manufactured by us, all in galvanized steel. The upper sliding is guaranteed by nylon olives which guarantee silence and great manoeuvrability.

The whole is covered with pre-painted and silicone-Curtained sheet metal casing in the upper part. (Optional)

The steel wheels with double bearings are inserted in the lower tube. Upper and lower closure is made with nylon brushes and aluminium support The lower rail is omega shaped, in press-folded galvanised steel and supplied with spacers to facilitate installation (at the customer's expense) and respect of the door spacing.

On the inside, at man height, there are aluminium alloy wheelbarrows painted black with 4 fixing points, as well as a central clutch to adjust the sabre handle; this particular shape makes it ergonomic and prevents the hands from being crushed. The opening and closing of the door is facilitated by black painted aluminium handles.

Single-point galvanised steel rods slide in the passages where Teflon supports are inserted to guarantee precision, remarkable sliding and silent movement.

If the door is already supplied motorised as standard, the upper part of the door is supplied with a safety micro to prevent it from opening unintentionally with consequent problems with the motorisation. The vertical seals, front and rear, are made of EPDM (anti-aging) natural rubber to ensure maximum closure. The space between the door and the rebate or between the doors is 50 mm (anti-crush) on all versions: manual, motorised or motorised as per current regulations.

Ready for standard motorisation.

Fields of application with temperatures between +4° C and +40° C

CE marking EN 13241-1 (CPD), wind resistance class 3

Acoustic isolation UNI EN 717-1; R=28dB

Thermal transmittance according to standard 13241-1 U=1.6W / m²K

Optionals:

• Motors according to current standards
• Pedestrian door with or without threshold (wicket door)
• Visual lights with safety glass
• Serramenti con vetro camera
• Perimeter padding
• External tower bolt with lock and lever
• Ventilation grids
• Support beams
• Fixed side and top panels
• Stainless steel construction
• Corten Steel construction
• Prepainted colours : B.co/similar grey RAL 9002, Aluminium white RAL 9006, Aluminium grey RAL9007, Fire red RAL 3000, Moss green RAL 6005, Gentian blue RAL 5010, Pure white RAL 9010, Traffic white RAL 9016, Earth brown RAL 8028, Anthracite grey RAL 7016.
• Painting in RAL colour of your choice

Moreschi's philosophy guarantees a robust product with excellent thermal and acoustic insulation and low maintenance costs with an attractive design.

The suspended sliding door consists of 52 mm thick leaves with respective internal perimeter frames in 20/10 thick galvanised steel profile. The doors are entirely covered with smooth or peeled sheets obtained through a continuous rolling process, in galvanised steel SENDZIMIR system, followed by phosphating and the application of 20 Micron thick primer. This pre-painting offers, without any alteration, the resistance of 400 hours in a salt spray chamber. Finally, we prevent scratches by applying adhesive film to be removed after installation.

The insulation is guaranteed by the injection of self-extinguishing polyurethane foam according to DIN 4102 class B2, with a density of not less than 43/45 Kg/m³, obtained through an under-press expansion process that ensures a high degree of thermal insulation. The upper rail is fixed to the ceiling or to the veil by special brackets designed and manufactured by us, all in galvanised steel. The upper sliding is guaranteed by trolleys with 4 tropicalized steel bearings, which guarantee great ease of manoeuvre.

The whole is covered with pre-painted and silicone-Curtained sheet metal casing in the upper part ( Optional ) In the lower part, a galvanised steel plate with double nylon wheels is fixed to the floor beyond the wall compartment and guides the door rigidly through the sliding.

The upper and lower closure is provided with nylon brushes with aluminium support.

On the inside, at man height, there are aluminium alloy wheelbarrows painted black with 4 fixing points, as well as a central clutch to adjust the sabre handle; this particular shape makes it ergonomic and prevents the hands from being crushed. The opening and closing of the door is facilitated by black painted aluminium handles.

Single-point galvanised steel rods slide in the passages where Teflon supports are inserted to guarantee precision, remarkable sliding and silent movement.

If the door is already supplied motorised as standard, the upper part of the door is supplied with a safety micro to prevent it from opening unintentionally with consequent problems with the motorisation.

The vertical seals, front and rear, are made of EPDM (anti-aging) natural rubber to ensure maximum closure. The space between the door and the rebate or between the doors is 50 mm (anti-crush) on all versions: manual, motorised or motorised as per current regulations.

Prepared for motorisation on request with special upper guide.

Fields of application with temperatures between +4° C and +40° C

CE marking EN 13241-1 (CPD), wind resistance class 3

Acoustic isolation UNI EN 717-1; R=28dB

Thermal transmittance according to standard 13241-1 U=1.6W / m²K

Optionals:

• Motors according to current standards
• Pedestrian door with or without threshold (wicket door)
• Visual lights with safety glass
• Serramenti con vetro camera
• Perimeter padding
• External tower bolt with lock and lever
• Ventilation grids
• Support beams
• Fixed side and top panels
• Stainless steel construction
• Corten Steel construction
• Prepainted colours : B.co/similar grey RAL 9002, Aluminium white RAL 9006, Aluminium grey RAL9007, Fire red RAL 3000, Moss green RAL 6005, Gentian blue RAL 5010, Pure white RAL 9010, Traffic white RAL 9016, Earth brown RAL 8028, Anthracite grey RAL 7016.
• Painting in RAL colour of your choice

The Folding door consists of 52 mm thick leaves; the internal perimeter frames in 20/10 thick galvanised steel profile are fully foamed and insulated. The doors are covered with smooth or peeled sheets 8/10 thick, obtained through a continuous rolling process in SENDZIMIR galvanised steel; this is followed by phosphating and the application of 5 Micron thick primer on both sides. On the external side is applied the finishing varnish with a thickness of 20 Micron. The surface thus obtained is completely smooth. The pre-painting offers, without any alteration, the resistance of 400 hours in a salt spray chamber. Finally, we prevent scratches by applying adhesive film to be removed after installation.

The insulation is guaranteed by the injection of self-extinguishing polyurethane foam according to DIN 4102 class B2, with an average density of 43/45 Kg/m³, obtained through an under-press expansion process that ensures a high degree of thermal insulation. The black upper rail has a double modular rail and is equipped with: trolleys with bearings; lateral flag for the collection of the doors and other accessories, so that it is already prepared for any motorization. For the solution on a single pack, the side stop post is made of galvanised steel with 120x40mm section and fixed with special galvanised steel fixing brackets. The lower "U" shaped rail (to be walled at the customer's expense), is in press-folded galvanized steel according to Moreschi's design and supplied with spacers to facilitate the installation and respect of the door centre distance. Furthermore, holes are drilled in the lower part and a pipe is welded where a flexible pipe can be inserted to convey water to the drainage systems. A drawing and measurements for correct installation will be attached to it.

The hinges, with frontal and internal fixing, are in aluminium alloy in matt black colour and obtained by die-casting process; a particular study has allowed to obtain hinges able to absorb shocks of means in order to limit possible damages to the doors. With the insertion of self-lubricating bushings and thrust bearings, maintenance is reduced to a minimum. Galvanized pin with anti-fall and milling system to ensure fixing with internal grain. This system prevents it from slipping off, with the consequent opening of the door.

On the inside, at man height, there are aluminium alloy wheelbarrows painted black with 4 fixing points, as well as a central clutch to adjust the sabre handle; this particular shape makes it ergonomic and prevents the hands from being crushed. The opening and closing of the door is facilitated by black painted aluminium handles.

Single-point galvanised steel rods slide in the passages where Teflon supports are inserted to guarantee precision, remarkable sliding and silent movement.

The sealing gaskets between sash and door, in natural EPDM rubber (anti-aging), are made on a special design with double crossed sash to guarantee maximum closure; moreover the space between the sashes is 50 mm (anti-crushing) on all versions: manual, motorised or motorised as per current regulations. In the upper and lower part the closure is guaranteed by a double needle gasket with pre-cut parts to guarantee the possibility of adjustment on non-planar floors. Finally, the vertical and horizontal gaskets are thermally welded together to create a single profile that guarantees tightness and thermal insulation.

Fields of application with temperatures between +4° C and +40° C

CE marking EN 13241-1 (CPD), wind resistance class 4

Acoustic isolation UNI EN 717-1; R=28dB

Thermal transmittance according to standard 13241-1 U=1.7W / m²K

Optionals:

• Motors according to current standards
• Pedestrian door with threshold (wicket door)
• Visual lights with safety glass
• Serramenti con vetro camera
• Perimeter padding
• External tower bolt with lock and lever
• Ventilation grids
• Support beams
• Fixed side and top panels
• Stainless steel construction
• Corten Steel construction
• Prepainted colours : B.co/similar grey RAL 9002, Aluminium white RAL 9006, Aluminium grey RAL9007, Fire red RAL 3000, Moss green RAL 6005, Gentian blue RAL 5010, Pure white RAL 9010, Traffic white RAL 9016, Earth brown RAL 8028, Anthracite grey RAL 7016.
• Painting in RAL colour of your choice

The BIFOLD DOORS is made up of 52 mm thick leaves with respective internal perimeter frames in 20/10 thick galvanised steel profile; the leaves are entirely covered with smooth or peeled sheets obtained through a continuous rolling process, in SENDZIMIR galvanised steel, followed by phosphating and the application of 5 Micron thick primer on both sides.

On the external side is applied the finishing varnish with a thickness of 20 Micron. The surface thus obtained is completely smooth. The pre-painting offers, without any alteration, the resistance of 400 hours in a salt spray chamber; finally we prevent any scratches with the application of adhesive film to be removed after installation.

The insulation is guaranteed by the injection of self-extinguishing polyurethane foam according to DIN 4102 class B2, with a density of not less than 43/45 Kg/m³, obtained by means of a press expansion process that ensures a high degree of thermal insulation.

The upper guide is in press-folded steel made to our design with electrolytic galvanized finish, it is already prepared for possible motorizations. It is equipped with trolleys with nylon-Curtained bearings that guarantee silence and easy manoeuvring. This type of door does not require a lower guide because the two side uprights, in galvanised steel or aluminium section and the upper guide are connected to each other.

The structure is anchored to the wall, thus forming a real frame for the door itself, guaranteeing a high degree of stability. On the ground, and in the centre of the wall compartment, an aluminium alloy slipper is installed where, when closing, pins with relative galvanised steel olives are inserted; this gives a guarantee of closure and safety. The hinges, with frontal and internal fixing, are in aluminium alloy in matt black colour and obtained by die-casting process; a particular study has allowed to obtain hinges able to absorb shocks of means, so as to limit possible damages to the doors. With the insertion of self-lubricating bushings and thrust bearings, maintenance is reduced to a minimum. Galvanized pin with anti-fall and milling system to ensure fixing with internal grain. This system prevents it from slipping off, with the consequent opening of the door.

On the inside, at man height, there are aluminium alloy wheelbarrows painted black with 4 fixing points, as well as a central clutch to adjust the sabre handle; this particular shape makes it ergonomic and prevents the hands from being crushed. The opening and closing of the door is facilitated by black painted aluminium handles.

Galvanised steel rods with two closing points, slide in the passages where Teflon supports are inserted that guarantee precision, remarkable sliding and silent movement. The upper terminals are made up of die-cast tips.

The sealing gaskets between sash and door, with crossed double leaf, are in EPDM (anti-aging) natural rubber to guarantee maximum closure; moreover the space between the sashes is 50 mm (anti-crushing) on all versions: manual, motorised or motorised as per current regulations. In the upper and lower part the closure is guaranteed by a double needle gasket with pre-cut parts to guarantee the possibility of adjustment on non-planar floors. Finally, the vertical and horizontal gaskets are thermally welded together to create a single profile that guarantees tightness and thermal insulation.

Fields of application with temperatures between +4° C and +40° C

CE marking EN 13241-1 (CPD), wind resistance class 3

Acoustic isolation UNI EN 717-1; R=28dB

Thermal transmittance according to standard 13241-1 U=1.7W / m²K

Optionals:

• Motors according to current standards
• Pedestrian door with or without threshold (wicket door)
• Visual lights with safety glass
• Serramenti con vetro camera
• Guide for 180° opening
• Perimeter padding
• External tower bolt with lock and lever
• Ventilation grids
• Support beams
• Fixed side and top panels
• Stainless steel construction
• Corten Steel construction
• Prepainted colours : B.co/similar grey RAL 9002, Aluminium white RAL 9006, Aluminium grey RAL9007, Fire red RAL 3000, Moss green RAL 6005, Gentian blue RAL 5010, Pure white RAL 9010, Traffic white RAL 9016, Earth brown RAL 8028, Anthracite grey RAL 7016.
• Painting in RAL colour of your choice

The Moreschi philosophy guarantees a robust product with excellent thermal and acoustic insulation, low maintenance costs and pleasant aesthetics with attractive design.